DAP RapidFuse Plastic Primer Kit 0.16oz

Brand	DAP
Color	Clear
Dimensions	6.6 x 4 x 4 inch

The DAP RapidFuse Plastic Primer Kit 0.16oz is the ideal solution for all of your plastic repairs at home or office! This product is a great way to restore your favourite items back to their original form and revel in their beauty! Surface Preparation and Application: 1. The surface of the substrate must be clean, dry, and free of all foreign materials. 2. Wear gloves, if you want to avoid skin contact. 3. For plastics apply primer over two adjoining surfaces and wait for 60 seconds for the primer to dry. Other types of substrates do not need primer. 4. Apply adhesive over one surface and join the two surfaces by using pressure. 5. Hold for 30 seconds to set, and 30 minutes to cure. You can use the DAP RapidFuse Plastic Primer Kit on the following substrates: Wood, Aluminum, Steel, Rubber, ABS, PVC, Melamine/Laminate HPL, Polycarbonate, Ceramics and Porcelain, Glass, Stone and Concrete, Tile, Leather, Paper, Composites, Polyethylene, Polypropylene, and Polytetrafluoroethylene among others. Clean-up after using the product: Prior to cure: Clean excess adhesive with tissue paper and replace the cap. After cleaning, wet any tissue used for wiping off the glue with water and dispose of it. Hands: Soak in warm soapy water and gently peel off the adhesive, flush the contact area with water and seek medical attention if needed. After cure: Cured adhesive may be cut away with caution using a sharp blade or removed with acetone. Do not use acetone or other solvents to remove the product from the skin, acetone can damage some plastics. Caution: Please note that items bonded with the DAP RapidFuse Plastic Primer Kit should not be placed in the oven, microwave, or dishwasher. Note: If the nozzle is clogged, simply clear the nozzle with a pin or the end of the paper clip.